TecMate
2400mA USB charger O-100
2400mA USB charger O-100
5 in stock
The portable & compact SAE to USB 2400mA charger for safe and fast charging of any USB device, including your phone, camera or GPS. Auto shut off won't drain your bike battery!
- Connects to battery lead with industry standard SAE 2-pin connector – O-01 battery lead Seals perfectly when mated with OptiMate SAE!
- Charges 1x USB device with up to 2400mA current available (or get optional O-110 USB splitter and charge 2 devices). – Charge current adapts to connected device for safe recharging.
- Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap seals when not in use – Worry free phone, camera or GPS charging in any weather!
- Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery from draining – Starts back up when vehicle engine fires up.
- Monitors and displays parked vehicle’s battery status – indicates battery is ‘start ready’ at the blink of an LED!
Smart 2400mA USB charger, with standby mode & vehicle battery monitor.
LENGTH: 8cm
CHARGE CONNECTOR (INPUT): 2-pin SAE
CHARGE CONNECTOR (OUTPUT): 1x USB
CHARGING AMPS: 2400mA @5V
OPERATION: fully automatic
- Smart stand-by mode: USB output turns off 1 hour after engine stopped or immediately if voltage reduces below 12.4V.
- 2 LED battery monitor (when USB output off) – battery status is displayed every 5 seconds.
- Short circuit, overheat, over-voltage protection.
INPUT: Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.
OPERATION (Voltage)
- USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
- USB 1 HOUR – 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
- STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
- AGM / LFP MONITOR – LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine.
- LED LFP: 13.1V to 13.3V.
- LED AGM: 12.4V to 13.1V.
- NO LED < 12.4V.
- OFF ≤ 9V
STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket ; use any USB cable, seals when inserted.
WARRANTY: 3-year limited replacement warranty
Share
I have a ram mount on my street triple r for my phone and this charger is awesome, with the 1 amp feed i can use the phone as a GPS, listen to music through my Senna headset all day long and never ever worry about it not keeping up.
Was planning a trip over several days, bought one of these to charge my phone and head set. 1 amp output means it charges anything. Lots of cable included. Well made, and the auto cut off under certain voltage is a great feature.
Great little gadget for charging IPhone, Go Pro or whatever. Good value for money as well
Used this on a 7 day trip from brisbane to sydney and back. Great product; kept my phone, gps, gopro charged at all times when i need it, without having to stop at some place to use a wall socket. Also, its a great thing that it continues to charge devices while the bike is off, until the battery reaches 12.4V. Which is sufficient to start the bike again.
purchased a unit as frustrating when phone or mp3 goes flat when needed, my wife "borrowed" mine so I bought another, does everything it says it will, in this day and age you need it