Texa AP13 - Benelli Cable
BENELLI cable for bikes with Sagem, Walbro and Athena ECU.
NB: For diagnosis, all you have to do is connect the main connector to the diagnostic socket.
For reprogramming you must also connect the cable's...
AP05 - Triumph / OBD Cable16-Pin OBD interface cable for use with Many Euro 4 Models from 2017 on:
Including (but not limited to)
Euro4 Bikes from 2016/17:
Texa AP33 - Keeway/Benelli Cable - superseded by AP54
ONE AP33 Left in stock.
Terminal cable for the diagnosis of the BENELLI, KEEWAY, FB MONDIAL, GEON, GOES, QUADRO vehicles equipped with a Delphi control unit and the BENELLI...
Texa AP07 - Universal Cable & Connectors
UNIVERSAL cable with two output lines: K and L
Use for bikes without dedicated cable availability
NB: AP01 interface cable requiredManufacturer's part number: 3151/AP07
Texa AP52/OBD - Benelli Athena OBD Cable
BENELLI cable for diagnosis and dealer reprogramming of BENELLI Euro 4 bikes with an Athena ECU.
NOTE: the cable has a 16-pin OBD connector. The AP05 (EOBD) cable is required to connect. Be...
Texa AP36 - Benelli Scooter Diagnostic Cable
For use with BENELLI Zenzero 350, KEEWAY Index 350, AEON and QUADRO.
Where the facility is available can be used for reprogramming the control units.
NB: AP01 interface cable required.Manufacturer's...
Superseded by Ap13
Complete cable for the diagnosis of BENELLI vehicles with CAN protocol, BRIXTON MOTORCYCLES (BIKE environment) and of PARSUN engines (MARINE environment). For the BENELLI make, the cable is the evolution of cable 3151/AP33 and can be used on the TRK 502...