Profi Laser BAT (Bike Alignment Tool)

(1 review) Write a Review

Product Overview

Full professional laser motorcycle wheel and frame alignment system suitable for bikes with conventional style footrests.

Checks if the wheels are in line, parallel and vertical.

Checks if frame, forks or swingarm are damaged

Simply clamp the spring-loaded high precision, CNC-machined gauges against the rims of the front and rear wheels. 

Check the laser lines against the screens mounted to the front wheel.

Both sides should show the same numbers on the screens and both lines should be vertical.

If the lines are not vertical, either the frame, forks or swingarm are bent.

5 minutes work generates an income that may not otherwise be chargeable by string lining. A measurement certificate can be produced showing all measurements providing the customer with tangible information which they would be happy to pay for.

This system allows checking of "offset" rear wheels found on many bikes, while still making sure the wheels are parallel and vertical. A ZX10 for instance has a 5mm offset.

String lining does not

A battery-operated laser-head is fitted on each side of the rear wheel gauges. 

The laser lines hit the screens attached to the front wheel showing the alignment and "straightness" of the wheels/frame/swing arm.

Vertical lasers aiming at 2 screens each side of the wheel shows alignment, offset and vertical alignment. 
Cheaper systems with single screens are available but cannot measure offset or vertical alignment. 

NOTE:  You may find cheap systems using one set of alignment scales mounted at the front of the front wheel. Using these you will create an out of line situation if the wheels are designed to be offset. For example a 2006 blade we measured had factory offset of 11mm. Using a cheaper system to align with only one reference scale will end up with mis aligned wheels and bad handling. The bike will pull to one side. 

The Profi system uses 2 sets of slignment scales allowing offset wheels to be aligned perfectly.

 The system is the perfect aid for:- 

• used-bike evaluation and cost estimates

• quick checks before/after repairs

• customizing, transformation and bike-design

• Safety-checks as customer service

Profi BAT can be paid off immediately by helping you not to take a bent bike in part exchange!.

$35 per bike income for a wheel alignment check and report.

1 bike per day = $175 extra income per 5 day week

That's $9100 extra income per year!

Even if you only check one bike per week the unit is paid for in less than a year.

Can you afford not to consider it?

Profi Laser BAT is delivered in a special storage case as a complete set, incl. 1 x "dot" Profi CAT and batteries.

Customer report sheet provided for you to fill out and print as required. We can even add your logo!



Product Videos


(1 review) Write a Review

1 Review Hide Reviews Show Reviews

  • 5
    laser align tool

    Posted by Terry Thurbon on 1st Feb 2013

    we have a motorcycle rental bussiness, we purchased the alignment tool nearly 2 years ago and have found it to be a verry useful tool in accessing bike condition after even a minor fall, we also find it very useful in our retail workshop for crash repair quotes. It has paid for itself many times over