Skip to product information
1 of 1


3151/AP56B Sea Doo Power cable

3151/AP56B Sea Doo Power cable

Regular price $192.00 AUD
Regular price Special Offer Price! $192.00 AUD
Special offer! Sold out
Tax included. Shipping calculated at checkout pior to payment.

4 in stock

T-cable required to guarantee a steady communication during the diagnosis of SEA-DOO (BRP), SKI-DOO (BRP) and LYNX (BRP) vehicles, which will otherwise be cut off after 30 seconds with key ON and engine OFF.

This cable must be connected between the diagnostic cable AP43 or AM47 or AP19 and the vehicle's socket. The power clamps provided with the diagnostic tool must be connected to the 2-way connector.

Please read the information held within IDC5 Technical Information sheets prior to using this cable!  

ATTENTION: it is severely prohibited to start/run the engine with the cable 3151/AP56 connected. Starting/running the engine, even accidentally, may damage its electrical system and the cable 3151/AP56.

If a diagnosis with the engine running is needed, disconnect the power adapter cable 3151/AP56


Connect the tool using only the cable AP43 or AM47 (or older 3151/AP19 if you have one). Start the engine in order to power the diagnostic socket autonomously.

View full details