1. Home
  3. USB Chargers
  5. 2400mA USB charger O-100
By TecMate

2400mA USB charger O-100
$49.95
$49.95
Tax included. Shipping calculated at checkout.
Availability: Low stock: 3 left
SKU: O-100
Dual output USB-A USB-C charger 3300mA O-114 - Moto-Tech Diagnostics
TecMateDual output USB-A USB-C charger 3300mA O-114
2400mA USB charger O-100 - Moto-Tech Diagnostics
$49.95
$49.95

The portable & compact SAE to USB 2400mA charger for safe and fast charging of any USB device, including your phone, camera or GPS. Auto shut off won't drain your bike battery!

  • Connects to battery lead with industry standard SAE 2-pin connector – O-01 battery lead  Seals perfectly when mated with OptiMate SAE!
  • Charges 1x USB device with up to 2400mA current available (or get optional O-110 USB splitter and charge 2 devices). – Charge current adapts to connected device for safe recharging.
  • Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap seals when not in use – Worry free phone, camera or GPS charging in any weather!
  • Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery from draining – Starts back up when vehicle engine fires up.
  • Monitors and displays parked vehicle’s battery status – indicates battery is ‘start ready’ at the blink of an LED!

 

Smart 2400mA USB charger, with standby mode & vehicle battery monitor.

LENGTH: 8cm

CHARGE CONNECTOR (INPUT): 2-pin SAE

CHARGE CONNECTOR (OUTPUT): 1x USB

CHARGING AMPS: 2400mA @5V

OPERATION:  fully automatic

  • Smart stand-by mode: USB output turns off 1 hour after engine stopped or immediately if voltage reduces below 12.4V.
  • 2 LED battery monitor (when USB output off)  – battery status is displayed every 5 seconds.
  • Short circuit, overheat, over-voltage protection.

INPUT: Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.

OPERATION (Voltage)

  • USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
  • USB 1 HOUR – 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
  • STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
  • AGM / LFP MONITOR – LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine.
    • LED LFP: 13.1V to 13.3V.
    • LED AGM: 12.4V to 13.1V.
    • NO LED < 12.4V.
  • OFF ≤ 9V

STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket ; use any USB cable, seals when inserted.

WARRANTY: 3-year limited replacement warranty

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jase
Charging at it's best

I have a ram mount on my street triple r for my phone and this charger is awesome, with the 1 amp feed i can use the phone as a GPS, listen to music through my Senna headset all day long and never ever worry about it not keeping up.

M
Michael (.N.
Does what it says on the box

Was planning a trip over several days, bought one of these to charge my phone and head set. 1 amp output means it charges anything. Lots of cable included. Well made, and the auto cut off under certain voltage is a great feature.

B
Baz
iPhone charger for the Ducati

Great little gadget for charging IPhone, Go Pro or whatever. Good value for money as well

M
Matt
Great for touring

Used this on a 7 day trip from brisbane to sydney and back. Great product; kept my phone, gps, gopro charged at all times when i need it, without having to stop at some place to use a wall socket. Also, its a great thing that it continues to charge devices while the bike is off, until the battery reaches 12.4V. Which is sufficient to start the bike again.

W
Wayne
even I managed to use it as it's so simple

purchased a unit as frustrating when phone or mp3 goes flat when needed, my wife "borrowed" mine so I bought another, does everything it says it will, in this day and age you need it

12